PAC Audio Universal Multi Camera Switching Interface

The PAC VS41 kit includes

• Universal Camera interface
• Multi Camera Interface Harness
• Instruction Manual

Compatibility Notes

• If you are using the VS41 with another PAC interface, such as a BCI-, RP4.2-, or RPA-, with an Expansion Port, simply connect the 10-pin connector into the module. Do not manually wire the positive or negative trigger wires. The BCI-RP4.2-, or RPA- module will digitally control the VS41 switching operation when connected to the Expansion Port.

• The VS41 video output will always default to the signal from Input 1 when none of the input triggers are activated. This Input is ideal for connecting the rear (reverse) camera.

• The VS41 inputs have priority in descending numerical order. For example: If you have Input 3 or 4 triggered, then you trigger a lower number input (for example Input 2), Input 2 will take priority over the higher numbered Input.

• The input triggers can accept either a pulsed or constant input, making them ideal for connecting to a turn signal as a trigger.

• The reverse trigger output will provide a 150 mA 12v (+) trigger while any of the input triggers are activated.

• Upon deactivation of the last positive or negative trigger, the last video input source and the reverse trigger output will remain active for an additional 3 seconds. (Not applicable when used with a BCI-, RP4.2-, or RPA- interface).

• Positive Input triggers accept input voltages in the range of 2v to 12v.